Job Safety Brief
Sat, October 24, 2026
Foreman / Crew Lead
John Hart
Job site
Cr 1170
Type of work
Overhead distribution
JSB index #
—
Job details
Job activity
Framing and setting poles and laying out wire
Scope / description
Framing and setting poles
Weather
Sunny
Crew on site
Ryder, landon, Ethan, Davis, Jonathan, Aaron,Charles, John
Submitted by
ryderhart807@gmail.com
Emergency information
Notification person
Ryder hart
Backup
Landon wilson
Radios & cell working
Yes
Nearest hospital
Wetherford regional hospital
Hospital address
3701 east main street, Wetherford, Oaklahoma, 73096
Muster point
Forman truck
Injury hotline
CORE 844-953-8234 (24/7) · 911 for emergencies
Job steps, hazards & safe actions
| # | Job step | Potential hazards | Safe actions |
|---|---|---|---|
| 1 | Driving to job | Getting in wreck | Pay attention while driving |
| 2 | Getting trucks set up and setting out cones and flags | Squishing feet or getting hit by cars when setting out cones | Watch for traffic and keep feet clear of outriggers |
| 3 | Setting poles | Getting in pinch point of pole and truck or fence | Stay clear of pinch point and out from under the pole |
| 4 | Loading trucks back up and getting signs up | Stay clear of pinch points or getting hit by cars | Watch for oncoming traffic and stay clear of outriggers |
| 5 | Driving back to yard | Getting into vehical accident | Watch for other drivers that aren't paying attention |
Energy isolation
FR clothing (min.)
CAT 2
Hazard controls briefed
Energized Electrical
- Voltage identified / treat as energized until proven otherwise
- Minimum Approach Distance established and briefed
- Cover-up / rubber goods installed (line hose, blankets, hoods)
- Rubber gloves and sleeves inspected, air-tested, and in test date
- Backfeed controlled (customer generators / parallel sources)
Energy Isolation & Control
- Energized work permit obtained
- Control of switching devices confirmed
Aerial Lift / Digger Derrick / Crane
- Equipment inspected
- Outriggers set and cribbing used
- Spotter used
- Tag lines used
- No personnel under suspended load
Climbing & Fall Protection
- Harness and lanyard / SRL inspected
- Anchorage point identified
- Secondary attachment in bucket
Ladders
- Inspect before use
- Maintain 3:1 angle
- Use 3-point contact
- Secure ladder at top or bottom
Work Zone & Traffic Control
- Signs, cones, and flaggers
- High-visibility clothing
Human Performance
- Pre-task planning
- Stop and think
- Peer check
- Avoid rushing
- Ask questions
- Job briefing held with all crew (OSHA 1910.269)
Required PPE
Hard hat / Class ESafety glassesFR clothingTested rubber gloves & sleeves (by class)Work glovesProper footwear (EH-rated)100% fall protection (harness / lanyard / SRL)Switch stick / hot stickHi-vis traffic vestTraffic cones & signs
Permits
Hot Work Permit
Crew (8)
- John Hart
- Ryder Hart
- Davis Burcham
- Ethan Gobble
- Landen Wilson
- Jonathan Summers
- Charles Kinard
- Aaron Averett
9 team member signatures captured · Job briefing acknowledged (OSHA 1910.269)